Página principal  |  Contacto  

Correo electrónico:

Contraseña:

Registrarse ahora!

¿Has olvidado tu contraseña?

Secreto Masonico
 
Novedades
  Únete ahora
  Panel de mensajes 
  Galería de imágenes 
 Archivos y documentos 
 Encuestas y Test 
  Lista de Participantes
 EL SECRETO DE LA INICIACIÓN 
 Procesos Secretos del Alma 
 Estructura Secreta del Ritual Masónico 
 Los extraños Ritos de Sangre 
 Cámara de Reflexiones 
 
 
  Herramientas
 
General: ¿PORQUE MUCHAS PIRAMIDES Y VOLCANES ESTAN EN EL PARALELO 19.47?
Elegir otro panel de mensajes
Tema anterior  Tema siguiente
Respuesta  Mensaje 1 de 18 en el tema 
De: BARILOCHENSE6999  (Mensaje original) Enviado: 12/07/2014 23:42

 
Image

Observamos que con una escuadra y un compas, y en el contexto a los dos circulos cruzados (Vesica Piscis) podemos dibujar una estrella de 6 puntas. Si tomamos un triangulo rectangulo, en el cual, sus lados tomamos como medida los numeros 1 y RAIZ CUADRADA DE 8, en el contexto al TEOREMA DE PITAGORAS sabemos que la hipotenusa es igual a la RAIZ CUADRADA DE LA SUMA DE LOS CATETOS AL CUADRADO. En este contexto vamos a tener que la hipotenusa va a medir 3. Si sacamos el ARCOTANGENTE DE (1/RAIZ CUADRADA DE 8) vamos a tener el IMPRESIONANTE NUMERO 19.47. NOTAMOS QUE EL MISMO DEPENDE DEL 8, osea el numero de la RESURRECCION, VIDA ETERNA O INFINITO. EL CIRCULO, EN SI SIMBOLIZA AL CIELO. LA RELACION DE MARIA MAGDALENA CON EL 22/7=3.14, en si simboliza que SUBIO AL CIELO. Por esta causa hay justo 227 dias entre el 1/1 y el 15/8 (ASUNCION DE LA VIRGEN).
3XSENO       (19.47)=RAIZ CUADRADA DE 8
3XCOSENO (19,47)=1
HIPOTENUSA=RAIZ CUADRADA (8+1)=3
TANGENTE (19.47)= 1/RAIZ CUADRADA (8)
 
SENO           (19.47)=0.3333333333=1/3
 
PREGUNTO: ¿PORQUE LA RELACION EXACTA DEL NUMERO 19.47 CON EL NUMERO DE LA RESURRECCION?

6 DE AGOSTO (DIA NUMERO 330 DEL CALENDARIO COPTO=AÑO NUEVO=11 DE SEPTIEMBRE)/ BOMBA DE HIROSHIMA / SALIDA HELIACA DE SIRIO / INDEPENDENCIA DE BOLIVIA / PARALELO 19:47 / TRANSFIGURACION DE JESUS (IGLESIA CATOLICA)

19.47
 
 
EVERYTHING IS CONNECTED AND THERE ARE NO COINCIDENCES


Primer  Anterior  2 a 3 de 18  Siguiente   Último 
Respuesta  Mensaje 2 de 18 en el tema 
De: BARILOCHENSE6999 Enviado: 12/07/2014 23:43

Mapping and Marking the Sphere for a Star Tetrahedron

As we apply the spin technology of torsion and sensing to the star tetrahedron things become very interesting.
First a little geometrical math is in order to map the positions onto the sphere.

Star Tetrahedron

Torsion propagation on the sphere

A vibration line or T field segment travels straight through the spheres mass to hit a node point at the surface.
We can consider the length of the line is the inverse of the frequency.
Line or rod length segment = Fractal
~300,000,000x / Line length = Frequency
These two will change together so given the ratio of the lengths we can also find the frequency ratios using the recipricles of the lengths.

Energy couples between octaves, and energy couples between frequencies at node positions.

As you set up a prime frequency on a rod with even nodes, both ends will spin the same direction. As you place two prime even rods with ends together the center node will flip to opposing spin.
Thus moving along the sphere the (inflow - outflow) will flip as we jump across segments.

The Blue lines or Star tetrahedron resonance frequency, will jump one node and reverse spin on both ends because these are chained, top to bottom in 3 each. Spin will be reversed. Since the Blue lines all form squares spin will couple with aiding effects in these loops at the highest frequency of the system. I believe this frequency may create the highest outflow on the sphere. Resonant rods are always looped using even segments for this reason.

The Yellow lines or Tetrahedron resonance frequency, will loop as sets of 3, and all loops will set up opposition or I believe inflow on the sphere at a lower frequency.

The Diameter or prime resonance frequency will set up the lowest frequency and set up a "like spin" on all nodes of the sphere. Both sides will be like spin. This spin will alter the others by unbalancing them all one direction towards outflow. If the diameter frequency is tripled [3x] however this will reverse to inflow only on one end. If a 3rd octave is pulsed we may see a flipping of the system???

The three frequencies will interact to change the balance. Because vibrations are present on spheres with foil hemispheres, using only foils, we can support any frequency at the outer EM wave layer by cutting accurate diameter discs and placing them on the nodes. Discs on opposite sides of the system have reversed spin at frequency 3. Same spin at frequency 1, and no connection at frequency 2.

The First Frequency Fractal

Sphere diameter = 79.12mm   [measured with a digital caliper]
Circumference =  pi times diameter = 248.562810 mm  [calculated]

The Second Frequency Fractal

[Yellow lines above]
Tetrahedron side is the distance between three nodes or two segments.
Tetrahedron side = Side times square root of 2
Tetrahedron side = 45.6799 * 1.41421 =  64.60097 mm
This can be used with a compass for plotting points across the blue squares corner to corner.

The Third Frequency Fractal

[Blue Lines above]
The Star Tetrahedron side length is the linear distance between node points.
Star Tetrahedron side = Diameter (79.12 mm)  /  Square root of 3 (1.73205080)
Star Tetrahedron side =  45.6799 mm ~ 45.68 mm   

Vertical Plane Separation

This is the distance between the planes formed at 19.47 degrees top and bottom
VPS = 1/3 the diameter
Vertical Plane Separation =  26.3733 mm

If your sphere has a seam already running from top to bottom, plot the 3rd frequency distance down the seam, then the VPS.
Do this on both sides, then start laying out the rest using fractals 2 and 3.


Foil Sizes

Surface distance between nodes is the distance traveled by an EM wave between nodal points, EM is a surface effect
This is the length of the curve of the surface where the conductive foil will be setting.
If one follows the curve of the circle from equator [0 degrees] to top, [90 degrees], it will cross first
19.47 degrees at a node and then the remaining 70.53 degrees to the top node.
The ratio is 70.53 deg / 90 degrees =  .7836666...
Using this ratio we can multiply by 1/4 the circumference to find our EM travel distance between nodes.

[.78366666  * (248.56281 circumference /4)  =  48.96759 surface distance E field

Surface Nodal distance = 48.6976 mm
Electric Lengths
Now we apply the T to EM ratios to find possible disc diameters, because we want the E field wave standing on them.
* .807911 =   39.3433 mm  Short Diameter  [19.67165 mm compass setting]
* 1.23775977 =   60.2759 mm Long Diameter  [30.138 mm compass setting]

1x  39.3433       60.2759
2x  78.6866      120.5518
4x 157.3732     241.1036   4x are all too large and cover over half the sphere.

The tempic field travels in straight lines between the nodes however. So instead we just use the linear side length to find the electric node length.
If true then the Tempic and Electric fields separate between the nodes. T follows the mass and E follows the surface. Unlike the rods the sphere splits them.
Side =  45.6799 mm  * .807911 =   36.90529 mm  Short Diameter  [18.45264 mm compass setting]
Side =  45.6799 mm   * 1.23775977 =   56.5407 mm Long Diameter  [28.270 mm compass setting]



Tetrahedron

Showing sphere marked out as a star tetrahedron, with first layer disc. 39.34 mm diameter disc will fit nicely,
sized at .807911 times the nodal length. Just holding the disc on the sphere, you can feel it start to vibrate up.

To me this says that with a sphere there is natural vibrations already coherent inside it for probably all the platonic shapes.
Since all are in a harmony we will probably not get EM rotation by only emulating perfect T resonance everywhere???

We desire the nodes to move, or at least the EM nodes move.
Successive layers then may have to be somehow altered to generate say a 60 hz shift in stability. This could be done using diameter or dielectric thickness.

Possible course:
Magnetic fields interact with the torsion fields in Bismuth at 95 degrees separation, this places the E fields at 85 degrees of separation.
See Principle of diamagnetic fields and mind
See also Spin Coherence - Howard Johnson and coherent spin alignment
Foil sets placed at 85 degrees separation on the sphere may couple torsion and E field, off balanced to platonic form, and do something. Possibly a magnetic field will result, or a motional instability, rotation, or a diamagnetic field.

See Waveforms on a sphere with a top coil
In this experiment it was shown how a scalar canceling coil at the equator can produce an amplitude modulated pulse at much lower frequency.
If we now instead set up a platonic resonance, can this be adapted to produce workable low frequency EM for extraction, powered by the spheres natural tempic field vibrations?
The scope trace reveals it may be possible if we can get the tempic field to vibrate up strongly enough into a top coil on the nodes.
Could this be why I had a strong torsion field vibration runaway when placing the coil on at 90 degrees to this natural angle and cutting it to tempic field resonance vibration???


Symmetry

The electric ratio .807911 seems rather weak on a sphere with discs, compared to copper tubes in water.
Tthis is probably due to the non symmetrical ratio. The symmetrical ratio is different.

Our foils are in fact symmetrical systems around a center node.
Solving for the ratio for a standing wave in both directions producing EM from Tempic resonance.

T = 14.195 cm
E1 = 7.445 cm
E2 = 20.943 cm

Ratio for small length = 7.445 / 17.195 = .524480
Ratio for long length = 20.943 / 14.195 = 1.475378


Now using these ratios applied to our Star Tetrahedron Frequency Fractal:

Star Tetrahedron Side =  45.6799 mm  3rd frequency
Surface Nodal Distance = 48.6976 mm
Single Tetrahedron Side = 45.6799 * 1.41421 =  64.60097 mm [distance between corners - like spin] 2nd frequency
Diameter = 79.12 mm  1st frequency

We can try applying the new ratio to any or all of these and check for an electric feeling on an Aluminum disc.
Anything over 1/2 the circumference will be too large to use.
248.562810 mm / 2 =  124.281405 mm [this is our limit]

Length                      * .524480                 * 1.475378
45.6799 mm              23.958 mm              67.395 mm
48.6976 mm              25.541 mm              71.847 mm
64.60097 mm            33.882 mm              95.311 mm
79.12 mm                  41.497 mm             116.732 mm

Compass setting to create the foil discs = 1/2 diameter [radius]

Diameter              Radius
23.958 mm            11.979 mm     Torsion Pressure [3rd frequency fractal]
25.541 mm            12.7705 mm  T
33.882 mm  ***    16.941 mm     Nice even nodes symmetrical [2nd frequency fractal]
41.497 mm            20.7485 mm   T [1st frequency fractal is radius]
67.395 mm            33.6975 mm   T
71.847 mm            35.9235 mm   T
95.311 mm            47.6555 mm    
116.732 mm          58.366 mm

Table must be fully explored for T to EM conversion on a sphere.

Best appears to be 33.882 mm [This is the Tetrahedron Frequency]

1/2x    16.941 mm
1x       33.882 mm  
2x       67.764 mm
4x       135.528 mm
[too large]

EM resonance lengths
E1                        E2                       Description
20.7485 mm        116.732 mm        [1st frequency fractal is radius] Top and bottom only. Diameter can have one or two segments or octaves.
33.882 mm          95.311 mm          [2nd frequency fractal] Tetrahedron 2 each Dual spin systems
23.958 mm          67.395 mm          [3rd frequency fractal] Star Tetrahedron


Adding foils for the 2nd and 3rd frequencies should increase inflow and outflow field.
Now using the prime frequency to flip the system we may be able to generate EM.
If a coil is wound on the equator it may flow current during the flip, if there is a voltage reversal.

Home
 
 
Respuesta Ocultar Mensaje Eliminar Mensaje  Mensaje 22 de 28 en el tema 
De: BARILOCHENSE6999 Enviado: 25/03/2014 23:51

Respuesta  Mensaje 3 de 18 en el tema 
De: BARILOCHENSE6999 Enviado: 12/07/2014 23:44
 

DaVinci Mystery

The Great Pyramid of Giza

Article by Ralph Miller

Since I wrote the first article about the DaVinci Code, I have received emails from readers who have suggested that there is more information contained within Leonardo DaVinci's drawing "Proportions of the Human Figure". I have continued researching the subject myself as well. In order to give some more of the information, I decided to write this second installment. I would also like to thank those who have sent me these ideas.

There seems to be a connection between all things. In other words, the nature of reality itself, or at least what we would consider consensual reality or 3D, seems to be holographic in nature. Each part of nature contains clues that unlock the puzzle of all the rest of reality, or to the whole of creation. DaVinci's drawing contains incredible information that shows the connection between humans and all of reality. There is a geometry hidden within the human body that reflects the geometry in everything else.

During an Ayahuasca journey, many people experience a perception of everything as part of an extraordinary mathematical equation. They see themselves in mathematical form. From nature around them to even their thoughts and emotions, everything is somehow represented as part of a beautiful mathematical geometry. Ayahuasca unlocks or awakens the visionary brain. The visionary brain completes the human ability to perceive. It unlocks the capacity of a greater seat of understanding that is located in the heart.

This expanded perception of reality cannot be simply intellectualized. We are used to conceptualizing ideas with our 'thinking' minds, and this is far too elaborate and complicated to grasp at that level. There is however, an expanded state of consciousness that elicits a 'knowing'. Knowing is quite different from 'understanding.' This knowing relies on a perception and trust that comes from the heart. It is very strange, because as soon as you trust … is as quick as you know.

Somehow 'knowing' is the feminine counterpart of masculine 'understanding'. We have had generations of conditioning around understanding, to the point where much of the art of knowing has gone dormant. This is all changing now. We are moving through a transition as humans. We are moving back to remembering our feminine selves.

The first DaVinci Code article showed step-by-step how a perfect six-pointed star could be constructed within the human figure. Some suggest that the six-pointed star also represents two three-dimensional tetrahedrons. A tetrahedron is a four-sided solid, where each side is an equilateral triangle. The two interlocking tetrahedrons together form a solid called a star tetrahedron.

Click on the image below to launch a slideshow explaining the concepts here. Once in the slideshow, you can hover over the right side of the image and click to navigate to the next image.

The star tetrahedron also represents what some believe to be the human energy field, also called the Merkaba. I don't think any of us can be certain that the human energy field looks like this, but there are some very synchronistic relationships that are revealed.

If you place a star tetrahedron inside of a sphere, with one of the apexes of the tetrahedron at the 'North' pole and one at the 'South' pole of the sphere, then the other six apexes of the star will touch or intersect the sphere at 19.47° above and below the "equator" of the sphere.

Consider the fact that the earth is a thin solid crust that is rotating at great speed around what is basically a liquid magma center. The result is an upwelling of great force that occurs at 19.47° North and South, that seemingly comes from nowhere. In any case the result is that a large amount of volcanic activity occurs at those latitudes. It is theorized that these forces are hyper-dimensional in nature and cascade into three-dimensional reality resulting in volcanoes.

Mauna Loa
Hawaii
19°, 28' N of equator
Mauna Kea
Hawaii
19°, 36' N of equator
Mexico City Mexico 19°, 23' N of equator
Dzibalchen Mexico
19°, 28' N of equator
Georgetown Grand Cayman 19°, 18' N of equator
Mount Emi Koussi Chad 19°, 47' N of equator
Mount Kalsubai India 19°, 33' N of equator
Xiangkhoang Laos 19°, 17' N of equator
Potosi Bolivia 19°, 13' S of equator
Yasur, Tanna Island Vanuatu 19°, 31' S of equator
Mount Samuel Australia 19°, 13' S of equator
Gweru Zimbabwe 19°, 31' S of equator

Many of the sacred sites of ancient civilizations are also located at or very near to 19.47° North or South of the earth's equator including the Pyramid of the Sun at Teotihuacan, Mexico (19°, 36' N of equator).

Further, volcanic activity is pronounced at 19.47° on other bodies in our solar system, including:

The Sun Sunspot activity and the region
of peak temperatures is limited to 19.5° North and South.
Venus The presumably active major
volcano complexes Alpha and Beta Regio are near 19.5°.
Mars The vast Olympus Mons shield
cone volcano is at 19.5°.
Jupiter The red spot is at 19.5°.
Neptune In 1986 Voyager II discovered a
similar spot at 19.5°.

Another synchronicity that occurs in DaVinci's drawing is that you can take the two-dimensional six-pointed 'Star of David' and if you interpret it as a view of a three-dimensional object it is a perfect dipyramid. The pyramids that were constructed by the Egyptians were not 3-sided tetrahedrons but were 4-sided pyramids, because they had a square base, plus four triangular sides. A dipyramid is simply two pyramids stuck together at their base.

If you rotate the dipyramid represented by the Star of David in DaVinci's drawing, by an amount equal to 36.26° (90° minus 19.47° divided by 2) the dipyramid will move into a perfect right-angle, two-dimensional view. The pyramids of Egypt were not quite perfect pyramids, as they were constructed slightly squatty. But even so, there is definitely a connection. Remember they are located at 19.5° North latitude!

Click on the image below to launch a slideshow explaining the concepts here. Once in the slideshow, you can hover over the right side of the image and click to navigate to the next image.

The ayahuasca journeys unfold reality into an extraordinary fractal mathematical representation. There is such a vast amount of information that is encoded into us already; it is simply a matter of unlocking the brain in order to perceive it. Somehow there is a connection between the dimensions of the human body to the earth; to the location of volcanoes; to the location of sacred sites; and to even to the pyramids themselves.

Incredible! To review, you have a perfect six-pointed Star of David in DaVinci's drawing, which can be extended into a three-dimensional star tetrahedron, unfolding a story about unknown hyper-dimensional physical forces occurring at 19.47° North and South. The two-dimensional Star of David can also be represented as a three-dimensional dipyramid, that when rotated by 35.26° which happens to be a mathematical factor of 19.47°, will return back to a two-dimensional representation of a dipyramid. Half of the dipyramid is a perfect equilateral pyramid.

The divine nature of man is hidden inside of reality itself, and the true nature of reality is hidden within humans. In our modern world we have developed myopia to such a degree, that we have collectively distorted our perception of where we really are and who we really are. But, many are making the journey back. A journey of remembering.

© Ralph Miller 2004

 


 
©2024 - Gabitos - Todos los derechos reservados